How to deal with the water in the electronic watch?
If the watch core is not displayed due to immersion in water or damp, different methods can be used to decontaminate and remove damp. If the watch core is only contaminated, it can be thoroughly cleaned with absolute alcohol. Then dry it under an incandescent lamp. If the watch core is only damp, it can be slowly heated under a 60w bulb for more than ten minutes.
The granular material of silica gel can be put into a closed container together with the watch that has accumulated water. After a few hours, the watch was taken out, and all the stagnant water disappeared. This method is simple and economical, without any damage to the accuracy and life of the watch. Silica gel after absorbing water many times. It can be dried at 120°C for several hours, and the water absorption capacity can be regenerated. It can be used repeatedly.
If the water ingress is not serious, it is just that there is a layer of mist in the watch glass. At this time, several layers of toilet paper or moisture-absorbing flannel can be used to wrap the watch tightly. Bake for about 30 minutes at a distance of 15 cm from a 40-watt light bulb. Can eliminate moisture. Don’t bake the watch directly near the fire, so as to avoid heat and deformation of the watch. It can also be worn on the wrist with the cover facing inward and the bottom case facing outward. The moisture will disappear after two hours. If the water ingress is serious, it is best to send it to the watch shop immediately to wipe the oil to remove the moisture from the movement. To avoid rusting of parts.
