How to deal with water in the watch?
Because water will cause mechanical corrosion, it is very destructive. The sea water is even more untouchable. Even if the waterproof meter is indicated, there is only one year of waterproof protection. Because the waterproof ring of the watch will wear out after a whole year of wear and tear, coupled with various unavoidable external factors such as sweat and dust, it will definitely be tired, so a new waterproof ring must be replaced after one year, otherwise it will not have the waterproof function.
Method 1: If the watch is soaked in water, use several layers of toilet paper or moisture-absorbing flannel to wrap the watch tightly. Place it about 15 cm near a 40-watt light bulb and bake for about 30 minutes. The water vapor in the meter can be water vapor. Don’t bake the watch cover near the fire directly to avoid thermal deformation of the watch.
Method 2: Put the watch face inward and the bottom case outward, and put it on your wrist. The moisture will disappear after two hours. If the water ingress is serious, it is best to send it to the watch shop immediately to wipe the oil and remove the moisture from the movement to avoid rusting of the parts.
Method 3: Use granular silica gel and the watch that has accumulated water into an airtight container. After a few hours, take out the watch and the accumulated water will disappear. This method is simple and economical, without any damage to the accuracy and life of the watch. The silica gel that has absorbed water many times can be dried at 120°C for several hours, the water absorption capacity can be regenerated, and it can be used repeatedly.